Sign Up!
Login
Welcome to Motorcycle Thailand
Wednesday, August 20 2014 @ 04:54 AM ICT
 Forum Index >  General Discussion >  Motorcycle Mods and Maintenance New Topic Post Reply
 Sportsbike alignment problem
   |  Printable Version
By: Anonymous: Mark ()  Tuesday, September 06 2011 @ 12:12 PM ICT (Read 832 times)  
Anonymous: Mark

I bought a used sportsbike that had been down once before. The owner replaced the plastics on the one side it went down on. However, I noticed the left clip-on is just a tad further away from the tank than the right one. I had to have a couple of friends site on it and see if they were seeing the same thing, I also noticed that in left turns I have to push outward on the left side of the bars to keep a line, but right turns seem effortless. Plus, I found that the bike drifts on the right as soon as I let go of the bars and let the bike coast.

The clip-ons don't seem to be damaged or bent in any way. At first I thought the only solution to finding out where the issue lied was by replacing the clip-ons, but if that winds up not fixing the problem then I'm stuck with two sets of clip-ons and the same problem. Could it be an alignment issue? My friend suggested loosening the upper and lower triple clamps and the head nut on top of the upper triple clamp and see it it might pop back into alignment, if it is an alignment issue, how would I be able to figure that out, and more important, what would I do next? My thinking may be way off, so any other tips on how to work out this problem would be helpful too.


       
  Quote
By: ThaiDesign (offline)  Tuesday, September 06 2011 @ 03:31 PM ICT  
ThaiDesign

It sounds like your motorcycle definitely has an alignment problem, with the front wheel to the left of the centerline of the rear wheel. This is the reason why your motorcycle needs constant input to turn left, but effortlessly steers to the right.

The easiest method to check alignment is with some long straight edges, or barring that, the 'string method.' This entails wrapping a long length of string once around the rear tire at about the 8 o'clock position, and then bring both ends forward so that they just touch the edges of the forward portion of the rear tire. You then check the distance of each string to both sides of the front tire (obviously you must have the motorcycle on a stable stand of some sort).

You can check the basic alignment of the front fork by removing the front fairing (if your motorcycle has one); simply check the position of the front tire relative to the perpendicular plane of the fork tubes. If it' s been tweaked already, loosening the triple clamp bolts won't let it miraculously 'pop back into alignment'; you'll need to straighten everything manually, whether on your own or employing a professional. You should also check the alignment of the rear axle adjustment hash marks (you can also use a tape measure to check the accuracy of the hash marks to the centerline of the swingarm pivot).

Forum Active Member
Active Member

Group Comfort
Level:
: +26

Registered: 09/21/07
Posts: 275

Profile Email    
  Quote
New Topic Post Reply


 All times are ICT. The time is now 04:54 am.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic w/ New Post Sticky Topic w/ New Post
Locked Topic w/ New Post Locked Topic w/ New Post
View Anonymous Posts 
Able to Post 
HTML Allowed 
Censored Content 

Advertising


Poll

How many times have you crashed your motorcycle in the last three years?

  •  Never
  •  Once
  •  Twice
  •  Three times
  •  Four times
  •  Five times
  •  More than 6 times
  •  More than 10 times
This poll has 0 more questions.
Results
Other polls | 3,401 votes | 13 comments

TMEA MEMBER

Thai Motorcycle Enterprise Association

Events

There are no upcoming events

Motorcycle Thailand on Facebook

Motorcycle Thailand on Facebook

My Account





Sign up as a New User
Lost your password?